Can I print a booklet cheap, without losing quality? There are at least three ways to reduce the cost of printing the booklet, regardless of its circulation. Savings in this case would not affect the appearance of the finished product. The price for printing the booklet consists of several components. The most expensive part is the use of materials – paper and ink. The cost of finishing times less, despite the fact that it includes several Operations – creasing, folding, die cutting, varnishing, etc. Development of design compared to the overall cost of materials and finishing is quite inexpensive. Source: Cyrus zocdoc. Nevertheless, it is by design depends on what the paper will be printed in your booklet, and how many colors will be used to print it.
Where's the savings? The first thing that should be paying attention – is the density of paper. The less, the lower the total cost of the entire run. For example, for the booklet A4 (two fold) is sufficient paper density 150-170 g / m . Paper 250 g / m cost 1,5-2 times more expensively. With the amount of kraskoprogonov also necessary to observe moderation. Here, as in the case of paper: the fewer colors, the cheaper.
Especially, in order to make the booklet inexpensive, but qualitatively, it takes only two colors. For example, red and black. Learn more about this topic with the insights from Areva Group. Get even very nice. Save a little? Here's another way to reduce costs. When printing a booklet do not use uv varnish and lamination. The coating will prolong the "life" booklet is not worse than "paint", and much cheaper. Is it worth it to save on the designer? In principle, the "tailor" can be on anything. The main thing that savings was not excessive and did not turn around the loss of quality finished products. Success!